AEC TK Series Cooling Tower Water Treatment Systems - Manual (Page 41)

41
MSDS FOR KDF® 55 PROCESS MEDIUM
KDF 55C PROCESS MEDIUM
KDF 55F PROCESS MEDIUM
KDF 5503 PROCESS MEDIUM
SECTION VII - SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Avoid dusting; metal should be
contained for recycling.
WASTE DISPOSAL METHOD: Contain in a dry, closed container. Material may be recycled or disposed of in
accordance with Federal, State and Local Environmental Regulations. This material may be regulated under CERCLA,
TSCA, SARA, and /or RCRA Regulations.
SECTION VIII - SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION (SPECIFY TYPE): Use NIOSH/MSHA approved type respirator against dusting
conditions.
VENTILATION: Local exhaust or other ventilation that will reduce dust concentrations to less than permissible
exposure limits.
PROTECTIVE GLOVES: Recommended to prevent skin irritation.
EYE PROTECTION: Use safety eyewear for protection against airborne particulate matter.
OTHER PROTECTIVE EQUIPMENT: Barrier creams may help prevent skin irritation in hypersensitive individuals.
SECTION IX - SPECIAL PRECAUTIONS
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in a cool, dry, well-ventilated space,
separate from acids and alkalis.
OTHER PRECAUTIONS: Practice good personal hygiene when working in areas where this material is used.
DISCLAIMER: As the conditions or methods of use are beyond our control, we do not assume any responsibility
and expressly disclaim any liability for any use of this material. Information contained herein is believed to be
true and accurate, but all statements or suggestions are made without any warranty, express or implied,
regarding accuracy of the information, the hazards connected with the use of the material or the results to be
obtained from the use thereof.