AEC WD 350 through WD3000 Dehumidifying Dryers - Manual (Page 51)

350-2100 cfm Dryers Chapter 6: Maintenance 50 of 58
Press after appears on the LED display. Use and to set the value. Then press
to save the new setting to memory.
Security Protection
-
When Security Protection is enabled, the setpoints can’t be changed when the Regeneration Monitor is
in “RUN” mode. The setpoints can only be changed in Level 1 using the
function.
Press after appears on the LED display.Use to toggle between ON and OFF. The
factory setting is “OFF”. When the selection has been made, press to save the new setting to
memory.