Prepare camera for camerago, 2 prepare camera for camerago – ACTi Camera Go! V1.5.10 User Manual
Page 7

ACTi CameraGo! User Manual
2.2 Prepare camera for CameraGo!
Please make sure that the firmware version is new enough (see the chapter
”). If you have purchased the cameras recently then most likely those models already
have the compatible firmware.
It is possible to download the compatible camera firmware from ACTi website
necessary. If you need assistance, then please contact ACTi technical support at
Important Notice:
Please note that weaker or interfered wireless signal may cause video latency. It may result
from having too many wireless systems covering the same area, or from too long distance
between PMON-1001 and the mobile device. The less data is there to be sent (smaller
resolution and bitrate of the video stream) the less obvious is the interference.