Mnr-310 system administrator ’s manual – ACTi MNR-310 User Manual

Page 19

MNR-310 System Administrator

’s Manual

Step 4: Insert 4G/LTE module into the slot

After locating the slot for 4G/LTE, insert your module into the slot at a 45-degree angle until the

gold-plated connector on the edge of the module disappears into the slot:

Step 5: Secure the module with mounting screws

Push the module down and secure it with the two mounting screws provided:

Step 6: Insert antenna jacks into the antenna holes

Remove one of the antenna hole covers. Place the circular ring on the antenna jack of the RF

cable and insert the antenna jack into the antenna hole. Make sure the flat side of the antenna

jack is facing upwards, to slide smoothly into the antenna hole:

Circular Ring

RF Cable

Antenna Jack