Mnr-310 system administrator ’s manual – ACTi MNR-310 User Manual
Page 106

MNR-310 System Administrator
’s Manual
4.
After configuring the actions, click
“
Apply
” to save this response.
5.
Go to
Setup
page
Schedule
tab and set the
Event Handling
schedule for this device.
Event responses will only be triggered when the trigger time falls within either the
Event
Handling
recording or the
Event Handling with Schedule
recording period.
6.
To check if this rule is successfully set, please make sure you have properly configured the
involved (1) trigging side settings like
Motion Detection Region
s or
DI
, and (2) response
side settings like
PTZ Preset Points
,
SMTP
Server
and
Email Recipients
,
FTP
Server
or
DO
. Then set the
Event Handling
schedule for current time and trigger this rule.
Enable
the
NVR
to
send
notifications via the SMTP server. The
default SMTP
and sender’s email settings
can be set in advance in
Setup
page
System
tab
Settings
Email& SMTP
Settings
.
1.
Type one or more recipients
addresses in “
To
” column (if more than
one, please separate them by “
;
”
symbol) or click the icon to select
recipients from existing the NVR User
list. The Email address should be set
in advance (in
Setup
page
Users
tab
Users
) for an NVR User so that
it can be selected in this list.
2.
Edit the email subject and content.
3.
Choose to attach a snapshot or not.
If the event trigger type is
Video
Recovery
or
Network Recovery
, this
function is disabled.
Note
1. Sending email
,
Uploading snapshot to FTP
and
Executing command
actions are
executed on the NVR server, not from the client computer.
2.
There must be video stream from the device when the event happens for event
responses to work.
3.
Internet Explorer browser may become unstable due to frequent pop-up instant
playback windows, please avoid setting the “
Pop-up
” action as the event rule for a
device which is too frequently triggered.