ACTi CMS 2 User Manual

Page 38

CMS 2.0 System Administrator’s Manual

You may individually check the NVRs this user group is allowed to access, and set the

permissions to configure NVR settings.

You may also enable the permissions related to a specific camera under the NVR.

nstead of tailoring the settings for each device, you may click “Device Unified Settings” and

set universal settings, which will be applied to any device you check under this NVR.

You may copy the Source Permissions Settings to other sources

. Click “Copy” under

Source Permissions tab to bring up the target NVR menu, check the target sources, and click

“Apply”.

New NVRs
Existing NVRs