Physical description, Hardware manual – ACTi I51 User Manual
Page 9
Hardware Manual
Physical Description
Item
Description
1
Reset Button
Used to restore the factory default settings, including the
administrator’s password. Using a pointed object, such as a pen,
press and hold the Reset button for 5 seconds or until the Power
LED lights up.
2
Memory Card Slot
Insert a memory card (not included) into the slot for local
recording purposes.
NOTE:
Supports only microSDHC and microSDXC cards.
3
Power LED
Lights up when the camera is powered on.
4
Audio Input / Output
Connects to the bundled audio cable which provides 3.5mm
audio input and output jacks.
5
Ethernet Port
Connects to the bundled network cable which then connects to a
network using a standard Ethernet cable.
6
Digital Input / Output
Connects to digital input or output devices, such as an alarm
trigger, panic button, etc. Digital Input (DI) and Digital Output
(DO) devices are used in applications like motion detection,
event triggering, alarm notifications, etc. See
on page 12 for information on how to
connect DI/DO devices to your camera.
7
DC 12V Power Input
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to an
external power adaptor. See
on page 10 for information.