Step 2: prepare the camera – ACTi I51 User Manual
Page 18
Hardware Manual
Step 2: Prepare the Camera
IMPORTANT:
When the camera is taken out from the box, the lens is covered by a thin film.
DO NOT
remove this film. It is used to protect the lens from scratches or fingerprint marks
which may happen during installation. Remove this film only after the camera is securely
installed and all connections are complete.
1.
Slightly twist the cover ring counter-clockwise and pull to detach it.
2.
Install a memory card into the memory card slot of the camera, as needed.
DO NOT Remove Film !
This manual is related to the following products: