ACTi Outdoor Dome on Straight Wall with Accessory Sets - Manual (Page 52)

www.acti.com
Installation Guide
52
5. Insert the sealing nut into the conduit gland body and then attach the clamping nut to
complete the cable solution.
Using Flex Conduit
Using Naked Cable
NOTE:

Ensure that the clamping nut is tightly attached to the gland body.

When using the naked cable with cable gland solution, be sure to pull enough length
of the cable to connect to the camera later. Once the clamping nut is tighted, the
cable cannot be pulled anymore.