Step 3: install the heavy duty mount, Optional: add extension tube(s), E 11 – ACTi Outdoor Dome on Straight Wall with Accessory Sets User Manual
Page 11
Installation Guide
Step 3: Install the Heavy Duty Mount
1.
Route the flex conduit or network cable through the conduit hole on the wall.
2.
Insert the flex conduit or network cable through the Heavy Duty Mount.
Using Flex Conduit
Using Naked Cable
3.
Attach the Heavy Duty Mount on the wall using four (4) screws (not included in the package).
Optional: Add Extension Tube(s)
If the Heavy Duty Mount is not long enough, add one extension tube (purchased separately). See
on page 73.
or
This manual is related to the following products: