ACTi Outdoor Dome on Straight Wall with Accessory Sets - Manual (Page 40)

www.acti.com
Installation Guide
40
Using Naked Cable
NOTE:

Ensure that the clamping nut is tightly attached to the gland body.

When using the naked cable with cable gland solution, be sure to pull enough length
of the cable to connect to the camera later. Once the clamping nut is tighted, the
cable cannot be pulled anymore.
6. Align the slot on the mount kit to the tab inside the Gooseneck and install the mount kit.
7. Twist the mount kit to align the screw holes and attach the two (2) mounting screws (included
in the mount kit package).