ACTi Outdoor Dome on Straight Wall with Accessory Sets - Manual (Page 26)

www.acti.com
Installation Guide
26
9. Insert the sealing nut into the gland body and then attach the clamping nut to complete the
cable solution.
Using Flex Conduit
Using Naked Cable
NOTE:

Ensure that the clamping nut is tightly attached to the gland body.

When using the naked cable with cable gland solution, be sure to pull enough
length of the cable to connect to the camera later. Once the clamping nut is
tightened, the cable cannot be pulled anymore.
Optional: Add Extension Tube(s)
If the Heavy Duty Mount is not long enough, add one extension tube (purchased separately). See
Installing Extension Tubes on page 73.