ACTi Indoor Box Camera on Wall with Bracket - Manual (Page 8)

www.acti.com
Installation Guide
8
Step 4: Connect the Cable(s)
1. Connect the network cable to the Ethernet port of the camera.
For camera models that support DI/DO and audio connection, connect the audio input/output
or DI/DO devices to the camera at this point, if necessary. See How to Connect DI/DO and
Audio Devices (Optional) on page 25 for more information.
2. Connect the other end of the network cable to a switch or injector. Then, connect the switch
or injector to a network, PC and a power source. See Power-over-Ethernet (PoE) connection
example below.
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera