ACTi Indoor Box Camera on Wall with Bracket - Manual (Page 10)

www.acti.com
Installation Guide
10
Installation Procedures Using
PMAX-1100
This section provides step-by-step procedures in installing the camera on a wall using
PMAX-1100 bracket.
NOTE: The camera images in this documentation may be different from your camera.
Step 1: Prepare the Camera
1. Remove the lens cover from the camera.
2. Attach the bundled lens to the camera. For models with vari-focal lens, connect the lens
connector to the camera .
Fixed Lens Example Vari-Focal Lens Example
NOTE: Lens type may vary depending on camera model. The above illustrations are
examples only.
2b
2b
2a
or