ACTi Indoor Box Camera on Wall with Bracket - Manual (Page 14)

www.acti.com
Installation Guide
14
2. Connect the other end of the network cable to a switch or injector. Then, connect the switch
or injector to a network, PC and a power source. See Power-over-Ethernet (PoE) connection
example below.
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
Step 5: Access the Camera Live View
See How to Access the Camera Live View on page 15 for more information on how to access
the Live View of the camera.
Step 6: Adjust the Viewing Angle and Focus
Based on the live view, adjust the focus and the viewing angle of the camera. Adjustments vary
depending on model, for detailed information, see:

D21F / E21F on page 23

D22F / E22F / E270 on page 23

D2xV / E2xV / E23 / E24 / E25 / E271 on page 24