ACTi Indoor Box Camera on Wall with Bracket - Manual (Page 12)

www.acti.com
Installation Guide
12
Step 3: Attach the Camera to the Bracket
NOTE: The following images show the mounting bracket attached on the bottom side of the
camera. Same procedures apply when attaching the mounting bracket on the top side.
1. For camera models with a memory card slot, insert a memory card into the slot with the metal
contacts facing down at this point, if necessary. Push until the card clicks into place.
2. Screw the camera to the bracket by its mounting block. Tighten the screw using a Philips
screwdriver.
3. Loosen the knob and adjust the camera angle.