beautypg.com

ACTi KCM-5211E User Manual

Page 13

background image

www.acti.com


Hardware Manual

13

2.

When done, close the back cover by tightening the three (3) screws.

3.

Connect the other end of the Ethernet cable to a network switch.

NOTE:

In case of using a non-PoE switch, you must use an external power adaptor (not

included) to connect the camera to a power source. See

Connecting a Power Adaptor

(Optional)

on page 15.

Micro SDHC Slot

Audio In /Out Jacks

12V Power Connector

Serial Connector

Digital Input / Output

(DI/DO) Connector

This manual is related to the following products: