Step 3: connect the ethernet cable – ACTi KCM-5211E User Manual
Page 12
Hardware Manual
7.
Attach the clamping nut to complete the cable solution.
NOTE:
Make sure the clamping nut is tightly attached to the conduit gland body to avoid
water leak.
Step 3: Connect the Ethernet Cable
1.
Connect the Ethernet cable to the Ethernet port of the camera.
If connecting other cables, such as an external power adaptor, DI/DO or serial devices,
connect the supplied terminal blocks and connect them to the corresponding connectors of
on page 15 for more information). Sample image
below.