beautypg.com

Step 2: prepare the flex conduit – ACTi KCM-5211E User Manual

Page 10

background image

www.acti.com


Hardware Manual

10

Step 2: Prepare the Flex Conduit

1.

From the network side, insert the Ethernet cable and other cables (if any) through the flex

conduit.

NOTE:

To connect an external power adaptor, digital input/output (DI/DO) or serial devices,

insert the cables without connectors through the flex conduit and as well as audio

input/output device cables at this point.

2.

Insert the clamping nut through the flex conduit.

3.

Insert the sealing insert and attach it at the end of the flex conduit.

This manual is related to the following products:
See also other documents in the category ACTi Camcorders: