Westermo FD-20 - Manual (Page 13)

13 6630-2220
6.4 Configuration
Configuration is divided into two parts:
… Serial transfer configuration, by DIP-switch settings in the FD-20.
… PROFIBUS DP Master configuration, using SyCon
® a PC based universal system
configurator
6.4.1 DIP switch settings
DIP-switches are accessable under the lid on top of the unit. DIP-switches are
used to configure the unit.
Warning!
Prevent damage to internal electronics from electrostatic discharges (ESD) by
discharging your body to a grounding point (e.g. use of wrist strap), before the
lid on top of the unit is removed.
Warning! Do not open connected equipment.
Prevent access to hazardous voltages by disconnecting the unit from AC/DC
mains supply and all other electrical connections.
!
!