Westermo IDW-90 - Manual (Page 27)

27 6620-2200
&C –DCD Option
Syntax:
AT&C
Parameters:
0:
DCD always ON
1: DCD indicates a connection (default)
2 DCD follows DTR
3: DCD indicates link level established (X.31-D only)
**cmds – Command set
Syntax:
AT**cmds=
Parameters:
0: AT command set (default)
6: Automatic dialling when DTR is set
7: Automatic dialling when TxD is received by the IDW-90
8: Automatic dialling always connect
10: IDW-90+Configurator
12:
Incoming calls only
D and DL – Dial command
Syntax:
ATD where represents a dial string composed of dial characters and dial
modifiers.