Westermo IDW-90 - Manual (Page 26)

26 6620-2200
Windows configuration tool TD-Tool
The ID-Tool is a PC – application program with a graphical interface for easy
configuration of the complex functions found in the IDW-90.
Please refer to TD-Tool for a complete description of the functionality of the
Windows program.
Configuration
The IDW-90 can be configured both from the local DTE interface and remotely over the
ISDN network. Independently if the local or remote interface is used the configuration
can be made with AT-commands or with a PC-based application configuration tool.
Basic configurations can also be made with DIP-switches locally.
AT-Commands
The most commonly used commands are listed below in short format
Please refer to the document “IDW-90 AT-Command Guide” for a complete list of all the
available AT-commands and a detailed description of the serial AT-command interface.
A – Answer a call
Syntax: ATA
**br – Fixed DTE rate
Syntax:
AT**br=
AT**br=?
AT**br
Parameters:
:
0: Autobauding, (automatic local bit rate adaption) (default)
1: 1 200 bit/s
2: 2 400 bit/s
3: 4 800 bit/s
4: 9 600 bit/s
5: 19 200 bit/s
6: 38 400 bit/s
7: 57 600 bit/s
8: 115 200 bit/s
9: 230 400 bit/s
20: 300 bit/s
21: 600 bit/s