Network – Welltech WellRec 5600 V.1.5 User Manual
Page 7
Welltech Computer Co., Ltd.
WellRec 5600
- 7 -
Step 2:
Enter login user name and password (the default user id is root and
user password is root). You can manage your user account via web
(refer to section
Account Manager
) later.
Figure 2.1-2
Step 3:
The screen shows the Home Page of WellRec 5600 as Figure 2.1-3.
Figure 2.1-3
Network
WellRec5600 has 2 network interfaces:
− Service interface: provide service over this network. If you have DNS
record, also you must be setup DNS server to effect.
− Management interface: it is used for management purpose.
Step 1:
After successfully logon to the system, we need change the network
configuration. Click Control > Network to setup the Service Interface
parameters as figure 2.2-1.
Figure 2.2-1
Step 2:
Enter the deserved IP address, Submask and default gateway or
select “Use DHCP”. Apply the change by clicking Apply button as
figure 2.2-2.