Welltech WellRec 5600 V.1.5 - Manual (Page 31)

Welltech Computer Co., Ltd.
WellRec 5600 - 31 -
Chapter 7 Telnet & RS-232 Configuration
WellRec 5600 also can support to be managed by Telnet or Console port
(RS-232) for basic operations.
Interface：
Network：TCP/IP Telnet (i.e. telnet 192.168.111.161 10086)
RS232:
- Connect using：COM1
- Baud Rate：9600
- Data bits：8
- Parity：None
- Stop bits：1
- Flow Control：None
- Wire：Null modem line (crossed)
Logon WellRec 5600 by Telnet
Use Windows build-in Hyper Terminal or other telnet terminal emulator
to login (e.g. telnet 192.168.67.1:10086). User ID & password will be required
for login (default login user id: admin, password: admin & user id: root,
password: root).
Command List:
Command Description
echo Auto echo on or off
eventlog Clean or show system log message
exit Quit the current session
ipconfig Configure or show network1,2 information
ping Check an IP address is available or not
reboot Reboot
reset Soft-reset
shutdown Shutdown
time
Reset or show system time.
timezone Setup or show system timezone
useradmin Manage user account.
help & ? View command list
Echo: auto echo on or not
Command Purpose
[root#]echo ? Usage: echo on/off
Example: echo on
[root#]echo on Echo is on
[root#]echo off Echo is off (default value)