Welltech WellRec 5600 V.1.5 - Manual (Page 25)

Welltech Computer Co., Ltd.
WellRec 5600 - 25 -
Timer milliseconds before timeout termination if there is no response for the
cancelled transaction(Default Value: 10000ms).**
Processing Queue Size: the maximum length of the processing queue
which holds events such as network events.
Proxy 2xx Sent Timer: A successful server INVITE transaction of a Proxy
server includes only the INVITE request and the 2xx response. (The ACK
is not part of the transaction).After sending the 2xx response the Proxy will
wait proxy2xxSentTimer before the transaction will terminate. (default:
8000 ms)**
Proxy 2xx Rcvd Timer: A successful client INVITE transaction of a Proxy
server includes only the INVITE request and the 2xx response. (The ACK
is not part of the transaction.)After receiving the 2xx response, the Proxy
will wait proxy2xxRcvdTimer before the transaction terminates. (default:
10000 ms)**
Use Rport Param In Via: Rport is short for Received Port which is a
parameter in Via Header.
Register Guard Time: The Register Guard time
Send Receive Buffer Size: The buffer size used by the SIP Stack for
receiving and sending SIP messages.
Max Transactions: The maximum transaction
Call Validation Method: Call Valid Check Method: ReInvite, Update or
disable
Authentication Failure Protect Timer: The Authentication Failure protect
timer
Reject Unregister Call: Reject any unregister call or not
Call Validation Timer: The timer to check periodically call is valid or not.
Call Failure Reason: The following SIP reason code will be considered the
call is broken or not when WellBG is doing the call validation.
- When Receiving 481: Only receive 481 response code will be
considered it is a broken call for call validation.
- All non 2xx: All of non 2xx response code will be considered it is a
broken call for call validation.
Advance System Configuration:
Start Path: Configuration > System > License
Figure 5.1-3
License Parameter Description:
Feature: System parameter
Serial No: System parameter
License Key: System parameter
☺Note: Please do not change it unless under Welltech’s instruction.