Welltech WellRec 5600 V.1.5 - Manual (Page 10)

Welltech Computer Co., Ltd.
WellRec 5600 - 10 -
Parameter:
Daylight Bias: The offset added to the Bias when the time zone is in
daylight saving time
Daylight Start: The date that a time zone enters daylight time
− Month: 01 to 12
− Week Day: Sunday to Saturday
− Apply Week (Day:01 to 05, Specifies the occurrence of day in the
month; 01 = First occurrence of day, 02 = Second occurrence of
day, ...and 05 = Last occurrence of day)
− Hour: 00 to 23
Standard Start: The date that a time zone enters daylight time
− Month: 01 to 12
− Week Day: Sunday to Saturday
− Apply Week (Day:01 to 05, Specifies the occurrence of day in the
month; 01 = First occurrence of day, 02 = Second occurrence of
day, ...and 05 = Last occurrence of day)
− Hour: 00 to 23
Step 3:
If you would like to use SNTP to sync time with a SNTP V4 Server,
click Time Sync button to setup it as figure 2.3-4.
Figure 2.3-4
Step 4: After successfully base setup; click Control > System to restart
WellRec5600 to take effect as figure 2.3-5.
Figure 2.3-5
Apply change
Start Path: Config > Apply Change
When you loaded a new working configuration or changed any configuration,
you need click “Apply Change” to take effect as figure 2.4-1.