Epson 9-Pin Dot Matrix Printer FX-2180 - Manual (Page 7)

Make sure that the printer finishes
printing. You may need to press the
Pause button to stop printing.
(When the printer is paused, the
Pause light is on.)
Tear off the fresh supply of
continuous labels at the perforation
nearest the paper entry slot.
Hold down the LF/FF button to eject
the remaining labels from the printer.
c
Caution:
When printing on labels, never press the
Load/Eject or Tear Off/Bin button.
When fed backward, labels can easily
come off the backing sheet and cause a
paper jam.
Removing Continuous Paper With Labels
7
Removing the Printed Document From the Push Tractor Removing Continuous Paper With Labels
To avoid peeling labels off the backing sheet and jamming the printer, follow the steps below
when you remove continuous paper with labels from the front push tractor.
1
2 3