Epson 9-Pin Dot Matrix Printer FX-2180 - Manual (Page 6)

Make sure the Tear Off/Bin lights are
flashing. (You may need to press the
Tear Off/Bin button.) When the Tear
Off/Bin lights are flashing, your
paper is in the tear-off position.
from the front push tractor from the rear push tractor
Removing the Printed Document From the Push Tractor
6
To remove the printed document from the front or rear push tractor, follow the steps below. To
remove continuous paper from the pull tractor, see Chapter 2 of the User’s Guide.
1
When you resume printing, the printer
automatically feeds the paper
backward to the top-of-form
position, and starts printing. To feed the continuous paper
backward from the tear-off position
to the standby position, press the
Load/Eject
button.
2
Open the paper guide cover, and tear off the printed document using
the printer’s tear-off edge.