Epson 9-Pin Dot Matrix Printer FX-2180 - Manual (Page 3)

Attach the front paper guide by
inserting it into the slots in the
printer as shown. Close the front paper guide, and
make sure the paper release lever is
set to the front push tractor position.
Note:
Always close the printer cover before printing.
The printer does not print when the cover is
open.
Loading Continuous Paper Onto the Front Push Tractor
3
3 4
When you load continuous paper with
labels, make sure that the auto
tear-off mode is off before you start
to print. If you feed continuous
labels backward, the labels may
come off the backing sheet and jam
the printer. To turn off the auto tear-off mode,
enter the printer’s default-setting
mode. See Chapter 5 of the User’s
Guide for instructions.