2 general information, 1 unpacking and inspection, 2 receiving and storing the fs10/fs32 – Watson-Marlow FS32 User Manual
Page 5: 3 mounting of capping head, General information, Unpacking and inspection, Receiving and storing the fs10/fs32, Mounting of capping head, Instruction handbook
INSTRUCTION HANDBOOK
FS10, FS32
FS10-32 IH EN 74-215-021 v1.02.doc
Version: 1.02
Page 5 of 17
2 General information
2.1 Unpacking and inspection
Please check that all ordered items have been received and that no items are damaged during
transport. In case of any defects or omissions, please contact WMF or your supplier immediately.
2.2
Receiving and storing the FS10/FS32
Before unpacking or storing of the FS10/FS32 it should be checked if the crate is damaged.
In case of long-term storage of the FS10/FS32 before installation, the machine must be stored in the
crate, and placed in a dry room. The crate is not water resistant.
2.3
Mounting of capping head
If the capping head has been removed during shipping it is mounted as described in section 3.2