Watson-Marlow FS32 - Manual (Page 10)

INSTRUCTION HANDBOOK
FS10, FS32
FS10-32 IH EN 74-215-021 v1.02.doc Version: 1.02 Page 10 of 17
All exhaust air is collected
and exhausted through the
air exhaust filter (2)
A hose connection can be
mounted in order to
“remove” the process air
form the capping area; but
the machine will function
even if no hose is mounted.
3
The tubes (4) are mounted
on the capping head.
The upper tube on the
upper connection and the
lower on the lower
connection
4
3.2 Mounting of capping head
Loosen the
handle on the
side of the
capping head and
mount the head
gently on the
slide bar.
Tighten the
handle.
Re-mount the air
tubes on the
capping head
Changing of capping head is done the opposite way as mounting.