Watson-Marlow 101F - Manual (Page 7)

7
Care and maintenance
Scheduled m aintenance of the 101U/R pum p is not r equired. If har mful liquids are spilled on to the pump, the
pumphead should be washed down thoroughly. The case and pum phead should be c leaned with detergent and water.
Do not use strong solvents.
101F/R Specification
Nominal rotor speed 4rpm, 4.8rpm
20rpm, 24rpm
Volatge/frequency 100-120/220-240V 50/60Hz
Power consumption 25VA
Fuse rating Type T (anti-surge) 0.08A
Operating temperature range 5 to 40C
Storage temperature range -40C to 70C
Weight 1.7kg (4lb)
Noise <70dBA at 1m
Standards IEC 335-1, EN60529 (IP21)
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
101U/R Specification
Maximum rotor speed 2rpm, 32rpm
Volatge/frequency 100-120/220-240V 50/60Hz
Control ratio 25:1
Power consumption 25VA
Fuse rating Type T (anti-surge) 0.1A
Operating temperature range 5 to 40C
Storage temperature range -40C to 70C
Weight 2.2kg (4.8lb)
Noise <70dBA at 1m
Standards IEC 335-1, EN60529 (IP21)
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
Specific drive performance details such as loaded dr ive speed variation against m ains supply voltage fluctuation and
drive stability from a cold start to normal operating temperature are available on r equest. For further information please
contact Watson-Marlow Technical Support Department.