Watson-Marlow SP Series - Manual (Page 9)

9
3 WARRANTY CONDITIONS
The manufacturer offers a one–year warranty on proper workmanship of all parts of the hose
pump. Exclusion is made for normal wear and tear of consumables, such as pump hoses,
lubricant, hose clamps, pressing shoes, ball bearings, wear ring, an seals, or parts which
have been misused or damaged through negligence.
This manufacturer’s warranty is null and void for any user who has substituted the parts of an
alternate manufacturer into a Bredel hose pump.
Damaged parts which are covered by the applicable warranty conditions can be returned to
the manufacturer. The parts must be accompanied by a fully filled in and signed safety form,
as present in the back of this manual. The safety form must be applied to the outside of the
shipping carton. Parts which have been contaminated or which have been corroded by
chemicals or other substances which can pose a health risk, must be cleaned before they
are returned to the manufacturer.
Furthermore, it should be indicated on the safety form which specific cleaning procedure has
been followed, and it should be indicated that the equipment has been decontaminated. The
safety form is required at all items, even if the parts have not been used.
Warranties purporting to be on behalf of Bredel Hose Pumps B.V. made by any person,
including representatives of Bredel Hose Pumps B.V., its subsidiaries, or its distributors,
which do not accord with the terms of this warranty shall not be binding upon
Bredel Hose Pumps B.V. unless expressly approved in writing by a Director or Manager of
Bredel Hose Pumps B.V.