Watson-Marlow SP Series - Manual (Page 29)

29
10.1.4 Surface treatment
The pumphead is provided with a two component epoxy base coat. After drying the layer
thickness must be at least 30 microns.
Subsequently these components are provided with a two component polyurethane top coat, in
the RAL 5017 colour blue and with a 100% gloss rate. After this coat of paint has dried the layer
thickness must be at least 30 microns.
All galvanized parts, exclusive of mounting articles, have been provided with an electrolytic zinc
layer of 15 –20 microns.
10.1.5 Weights and dimensions
Description Weights and dimensions per pump model
series SP/10 SP/15 SP/20 SP/25 SP/32 SP/40 SP/50 SP/65 SP/80 SP/100
Net weight pump
(kg)
10 19 19 59 85 139 195 395 600 955
Gross weight pump
(kg)
10 19 19 80 125 175 265 450 680 1055
Dimensions crate
(cm)
30x26x
27
37x32x
28
37x32x
28
72x56x
55
87x62x
65
87x76x
63
106x
90x68
127x
105x
84
148x
124x
93
170x
145x
107
Cubage (m 3 ) - - - 0,222 0,35 0,42 0,65 1,12 1,71 2,64
Dimension pump
hose (mm)
10x31x
510
15x36x
755
19x36x
755
25x53x
1005
32x61x
1250
40x66x
1490
50x80x
1820
65x99x
2335
80x
120x
2780
100x
144x
3275
Weight pump hose
(kg)
0,35 0,70 0,70 2 3 3,80 6,40 11,50 21 31
Quantity lubricant
required (litres)
0,25 0,50 0,50 2 3 5 10 20 40 60
Weight lubricant (kg) 0,30 0,60 0,60 2,5 3,6 6 13 26 52 78
Weight supports [set]
(kg)
0,75 1,60 1,60 17 24 43 56 50 92 160
Weight pump shaft
(kg)
0,50 0,90 0,90 2 5 5 9,50 18 39 53
Weight rotor (kg) 0,75 2,50 2,50 4 8 12 24 44 69 108
Weight pressing
shoes [set] (kg)
- - - 0,70 1,10 2 2,50 5 8 13
Weight pump cover
(kg)
0,2 0,65 0,65 7 10 16 24 54 89 123
Weight pump
housing (kg)
5,70 10,7 10,7 21 40 50,50 82 170 238 390
Flange connection,
without inserts [set]
(kg)
1,47 1,72 1,90 2,98 4,26 4,88 6,38 7,80 11,4 14,9
Insert [set] (kg) 0,04 0,05 0,07 0,13 0,18 0,34 0,46 3,13 4,06 5,69