Operation, Bottle adjustment, Adjusting the outlet sluice – Watson-Marlow FF20 User Manual

Page 9: Operator’s manual, Ff20

Text mode
Original mode

OPERATOR’S MANUAL

Machine Type:

FF20

FF20 OM 1.01 EN.doc

Page 9 of 24

5. OPERATION.

5.1.

Bottle adjustment.

5.1.1. Adjusting the outlet sluice

Fig. 5

Press the pneumatic stop button and the pressure is released from the system.

Loosen the two wing screws (A) so that the guide rail can be pushed forward and backward.

Place two bottles at each end of the longitudinal bottle sluice and adjust the guide rail at a
distance of about 1 mm to the bottles. Tighten the wing screws (A)
Check that all bottles run freely in the bottle sluice.

Note: when running with soft plastic bottles it is better if the distance is smaller so the
bottles move a little tight.