Installation, Assembly of flexfeed 20, Operator’s manual – Watson-Marlow FF20 User Manual
Page 6: Ff20
OPERATOR’S MANUAL
Machine Type:
FF20
FF20 OM 1.01 EN.doc
Page 6 of 24
4. INSTALLATION.
4.1.
Assembly of FlexFeed 20.
During transportation the FlexFeed 20, the inlet and outlet trays and the filling stand are
dismantled and must therefore be re-attached to the FlexFeed 20 frame.
Fig. 1
Remove the cover plate (S) Fig. 1 via the two black finger screws.
Attach the inlet tray (T) Fig. 1 by Allen screws in the four holes in the frame.
Attach the outlet tray (O) Fig. 1 by Allen screws in the four holes in the frame.
Put the cover plate back in place.
See also other documents in the category Watson-Marlow Pumps:
- 323Dz (53 pages)
- 620SN (100 pages)
- Bredel 25 (76 pages)
- APEX35 (72 pages)
- Bredel 80 (76 pages)
- Bredel 15 (68 pages)
- 520Bp (107 pages)
- 323D (48 pages)
- EBU250 (8 pages)
- MR-Series (52 pages)
- GD30P (14 pages)
- EC 60 (28 pages)
- PetroProof Series (49 pages)
- Qdos30 Universal (40 pages)
- Qdos60 Universal 110V Logic (78 pages)
- 120S/DM3 (36 pages)
- 120F/DV (26 pages)
- SP50 (86 pages)
- 101U (14 pages)
- 505BA (21 pages)
- 700 series (11 pages)
- Qdos60 Profibus (66 pages)
- 521CC (47 pages)
- 401U (12 pages)
- 620RE4A (11 pages)
- 405U (13 pages)
- 624S (46 pages)
- Bredel 2100 (96 pages)
- Bredel 2100 (92 pages)
- 701 (25 pages)
- 840 (13 pages)
- 505LGA (11 pages)
- 620RE4 (19 pages)
- 205U (13 pages)
- SPS (142 pages)
- 505U (19 pages)
- 704S (17 pages)
- 621 Trio (11 pages)
- 313T (16 pages)
- 624Di (37 pages)
- 505Di (39 pages)
- 501CC (17 pages)
- 504Du (30 pages)
- 504Du (30 pages)