Cleaning, Cleaning of the frame, Operator’s manual – Watson-Marlow FF20 User Manual
Page 16: Ff20
OPERATOR’S MANUAL
Machine Type:
FF20
FF20 OM 1.01 EN.doc
Page 16 of 24
6. CLEANING.
6.1.
Cleaning of the frame.
The FlexFeed 20 frame is not connected to the mains (110/220 VAC), and it is therefore
quite safe to use water or a similar liquid for the cleaning of the frame. If the rotary table
must be removed in order to be cleaned, this can be done as follows:
Fig. 12
Remove the cover plate over the bottle exchanger.
Loosen the Allen screw and remove the bottle feeder (1)
Loosen the Allen screw (2) and lift the bottle guide (3) off.
Remove the Allen screw for the guide rail adjustment (4) and the guide rail with the picking
wheel can be put to one side.
The rotary table can be removed and cleaned.
See also other documents in the category Watson-Marlow Pumps:
- 323Dz (53 pages)
- 620SN (100 pages)
- Bredel 25 (76 pages)
- APEX35 (72 pages)
- Bredel 80 (76 pages)
- Bredel 15 (68 pages)
- 520Bp (107 pages)
- 323D (48 pages)
- EBU250 (8 pages)
- MR-Series (52 pages)
- GD30P (14 pages)
- EC 60 (28 pages)
- PetroProof Series (49 pages)
- Qdos30 Universal (40 pages)
- Qdos60 Universal 110V Logic (78 pages)
- 120F/DV (26 pages)
- 120S/DM3 (36 pages)
- SP50 (86 pages)
- 101U (14 pages)
- 505BA (21 pages)
- 700 series (11 pages)
- Qdos60 Profibus (66 pages)
- 521CC (47 pages)
- 401U (12 pages)
- 620RE4A (11 pages)
- 405U (13 pages)
- 624S (46 pages)
- Bredel 2100 (96 pages)
- Bredel 2100 (92 pages)
- 701 (25 pages)
- 840 (13 pages)
- 505LGA (11 pages)
- 620RE4 (19 pages)
- 205U (13 pages)
- SPS (142 pages)
- 505U (19 pages)
- 704S (17 pages)
- 621 Trio (11 pages)
- 313T (16 pages)
- 624Di (37 pages)
- 505Di (39 pages)
- 501CC (17 pages)
- 504Du (31 pages)
- 504Du (30 pages)