Vuzix Wrap 1200DX User Manual
Page 8
8
§
Allow the Controller to charge for a minimum of 4 hours prior to its first use.
Earphones
Be sure to adjust the volume to a safe and comfortable level before inserting the
earphones into your ears. The volume is controlled through the “+” (plus) and
“–” (minus) buttons on the Controller.
§
Plug the stereo earphones into the jacks above each of the eyewear displays.
The noise-isolating earphones are not required for the proper operation of the
eyewear. Unplug the earphones if you prefer to use an alternate speaker system.
• The Controller provides a HDMI and a USB port plus four control buttons and
an indicator light.
§
Use the HDMI cable provided, or an alternate High Speed HDMI
®
Cable, to
connect the eyewear’s Controller an HDMI equipped host device.
HDMI
USB
Windows based PCs
automatically detect
new speaker
connections and
reconfigure the audio
output to be played
through them. If you
wish to use an
alternate speaker
system, select the
desired speakers
through the Windows
Control panel.
Additional adapters or
cables may be required
for your installation.
Cables not certified as
High Speed HDMI®
Cables and may not
provide the same level
of performance and/or
compatibility.