Vuzix Wrap 1200DX User Manual
Page 7
7
This section of the guide leads you through the installation and connection of your
WRAP 1200DX eyewear to a variety of host devices. Some adaptation may be
required for some devices.
• The Wrap 1200DX is powered by a rechargeable lithium-ion battery in the
Controller. The eyewear’s runtime varies dependent upon the power demands
of the video, screen brightness and other factors including the charge level of the
Controller’s battery.
Prior to First Use
• Prior to using the Wrap 1200DX its battery must charged for a minimum of
four (4) hours, using a USB power supply providing a minimum of 0.5 Amps
(charger not included).
Charging
• The Wrap 1200DX’s Controller can be charged using a USB charger plugged
into an electrical outlet or another USB power source, such as a USB port on a
computer, as long as it provides 0.5 Amps or greater.
The USB cable provided with your eyewear has two different connectors, a small
Mini-B connector (left) and a standard Type A (right) as illustrated below.
§
Plug the Mini-B connector into the USB port on the Controller and the Type A
connector into the USB power source.
Some HDMI
connections require
significant power. For
continuous use of the
eyewear over extended
periods, you may have
to maintain a
connection to the USB
charger.
A USB power supply
providing 1.0 Amps or
greater is
recommended.