Vir2 Instruments Acoustic Legends HD - Manual (Page 41)

4 1 . . . . . . . . . . . . . . . . . . . A c o u s t i c L e g e n d s H D
After having loaded an Instrument from the library you should be able
to trigger it via MIDI using a keyboard controller. Kontakt Player 2's
sound will generate through Sonar's mixer and directly to your sound
card. If the plug-in does not receive MIDI or generate audio, then
make sure to check the following areas:
Make sure MIDI Patch Through is enabled in the Studio menu of
Sonar.
The MIDI channel of your MIDI track must correspond to the receive
channel of the loaded instrument.
Make sure that the instruments track output is correctly set.
Make sure that you have properly configured your sound card for use
with Sonar.
Digidesign Pro Tools
Launch Pro Tools.
Create a new Instrument track by choosing New Track from the File
menu.
Locate the channel mixer Window -> Mix.
The dark grey box at the topmost section of the Instrument channel
is the RTAS insert section. Click on the first empty slot to show all
available RTAS plug-ins.
Choose Kontakt Player 2 from the multi-channel RTAS plug-in >
Instrument menu