beautypg.com

Vir2 Instruments Acou6tics Manual User Manual

Page 22

background image

a

c

ou6tics

37

Acou

6

tics/

ADVANCED SETUP

Acou

6

tics/Advanced Setup

PLAYBACK SETUP

c

HAP

tER 08

/

AD

V

ANCE

SETUP

c

HAP

tER 09

/ PLA

YBA

CK
SETUP

ADVANcED SEtUP

Automation:

Easily automate all the settings (except menus) by right clicking on them

and changing the CC you want to assign to the slider or button here. For

example: You want to assign ‘

Strum time | Auto Adjust’ to CC11. Right click

on the ‘

Strum time | Auto Adjust’ slider (as displayed in the picture above).

After that either play a CC11 controller change in your sequencer or rotate

the knob you assigned to CC11 on your MIDI keyboard.

Note: You shouldn’t assign CC1 (modwheel) or CC64 (sustain pedal) to any

of the slider / buttons, because CC1 is controlling vibrato strength / velocity

in tremolo mode, and CC64 is used as sustain pedal.

quick Preset:

The Quick Presets allow you to quickly tweak parameters of Acou6tics

without having to go through all the advanced settings. In this menu you’ll

see exactly which settings are affected by the preset you have selected.

PLAYBAcK SEtUP | SIMULAtIoN
Simulation | cPU:
Enables or disables features of the Acou6tics engine to make it sound more

realistic or to make it more efficient.
• Offline | Strum/Pick: ON | Pick Position: ON | Symp. Reso.: CORRECT |

String X-Fade: MAX (10000 ms)
• High | Strum/Pick: ON | Pick Position: ON | Symp. Reso.: EASY | String

X-Fade: MAX (10000 ms)
• Medium | Strum/Pick: ON | Pick Position: ON | Symp. Reso.: OFF | String

X-Fade: MED (7500 ms)
• Low | Strum/Pick: ON | Pick Position: OFF | Symp. Reso.: OFF | String

X-Fade: MED (7500 ms)
• Minimum | Strum/Pick: OFF | Pick Position: OFF | Symp. Reso.: OFF |

String X-Fade: MIN (5000ms)
Simulation | String x-fade (Sustain Build Up):
Setup the amount of sustain build up here. High values mean more voices

will be played, lower values mean less voices will be played. Experiment

with this setting until it sounds right. If you have a track at a high tempo try

values below the default, if you have a track at a very slow tempo, try lower

values.
Simulation | Pick Position:
• Off: Disables the pick position simulation.
• Normal: Enables the pick position simulation.
• High: Enables the pick position simulation and adds more variation, but

with a bit more phasing.
Simulation | Auto Sustain:
•Off: No auto sustain.
• Strum Trigger Keys: Pressing the strum keys automatically adds the

sustain pedal as long as a strum key is pressed.
• Pick Trigger Keys: Pressing the pick keys automatically adds the sustain

pedal as long as a pick key is pressed.
• Strum + Pick Trigger Keys: Pressing the pick/strum keys automatically

adds the sustain pedal as long as a pick/strum key is pressed.

cHAPtER 08

cHAPtER 09

38