Verilink TS 2000 (880-502215-001) Product Manual - Manual (Page 20)

14 Test System 2000 Release Notes
Figure 5 Select CSU Element Dialog Box
c. In the Select CSU Element dialog box, select the shelf and slot
numbers of the target element by editing the Shelf and Slot edit
boxes as appropriate.
d. Click on the OK button.
Both of the above Select dialog boxes disappear. The AS2000
control panel reappears, as shown in Figure 3. If the connection is
successful, the status bar at the bottom of the TS2000 screen
displays the message:
Connected to node:
(If you get a time-out or a message saying connecting attempt failed:
a. Check your cable connection between the PC and the host
element.
b. If the cable is OK, then make sure you have selected a valid node
in AM2000