Verilink S Lite (34-00297.2) Product Manual - Manual (Page 11)

2
I
NSTALLATION AND
C
ONFIGURATION
Introduction This chapter contains information and instructions required to
prepare the Verilink S Lite for use. Included are initial inspection
procedures, mounting instructions, configuration guidelines,
connection and powering information.
Safety
Summary
This manual contains information and warnings that must be
followed to ensure safe operation and retain the equipment in a
safe condition.
This WARNING sign denotes a potential hazard to the
operator. It calls attention to a procedure or practice that, if
not correctly performed or adhered to, could result in injury or loss
of life. Do not proceed beyond a WARNING sign until the indicated
conditions are fully understood and met.
Unpacking
and
Inspection
This unit is carefully packaged to prevent damage in shipment.
Upon receipt, inspect the shipping container for damage. If the
shipping container or cushioning material is damaged, notify the
carrier immediately and make a notation on the delivery receipt
that the container was damaged (if possible, obtain the signature
and name of the person making delivery). Retain the packaging
material until verifying the contents of the shipment are complete
and the unit has been checked both mechanically and electrically.
If the contents of the shipment are incomplete or, if there is
mechanical damage or defect, notify Verilink. If the shipping
container is also damaged, or the cushioning material shows
signs of stress, notify the carrier of the damage as well as
Verilink. Keep the shipping materials for the carrier’s inspection.
Verilink will arrange for repair or replacement without waiting
for claim settlement.
Supplied
Materials
The S Lite is shipped from the factory with the following
standard equipment.
✦ external AC power supply
✦ reference manual or CD
✦ adapter cables (if applicable, based on unit or version ordered)
✦ adhesive strips