Verilink DIU 2131 (880-502765-001) Product Manual - Manual (Page 15)

Verilink User Manual 3-1
Chapter
3
Configuration Menu
This chapter describes all of the options and settings included in
the Configuration/Diagnostic Menu.
Pre-requisites
Before configuring the DIU 2131, the associated CSU must be
configured for Mux mode. This is done using the DIU bus option in
the CSU’s Configuration Menu to choose Data Bus A, B or C. See the
CSU manual for more information, either the SCC 2020 User Manual
or the TAC 2010 User Manual.
Configuring the DIU 2131
After configuring the CSU, you can configure each associated DIU.
From the Main Menu , use the Shelf/slot option to select the DIU
2131 and then enter “ C” for configuration. Figure 5-1 shows the
resulting menu.
Figure 3-1 DIU 2131 Configuration/Diagnostic Menu
--- DIU 2131 CONFIGURATION/DIAGNOSTIC MENU --- --- DIU 2131 CONFIGURATION/DIAGNOSTIC MENU --- --- DIU 2131 CONFIGURATION/DIAGNOSTIC MENU --- --- DIU 2131 CONFIGURATION/DIAGNOSTIC MENU ---
C) CSU [ 1,1 ] C) CSU [ 1,1 ] C) CSU [ 1,1 ] C) CSU [ 1,1 ]
T) timing source CSU T) timing source CSU T) timing source CSU T) timing source CSU
chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Dp)port 02 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. Dp)port 02 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. Dp)port 02 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. Dp)port 02 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Lead Toggles DTR) DSR) RTS) CTS) DCD) Lead Toggles DTR) DSR) RTS) CTS) DCD) Lead Toggles DTR) DSR) RTS) CTS) DCD) Lead Toggles DTR) DSR) RTS) CTS) DCD)
Forced Ports -/- -/- -/- -/- -/- Forced Ports -/- -/- -/- -/- -/- Forced Ports -/- -/- -/- -/- -/- Forced Ports -/- -/- -/- -/- -/-
Port 1 Port 2 Statistics Port 1 Port 2 Statistics Port 1 Port 2 Statistics Port 1 Port 2 Statistics
Mp) mode 64K 64K FW/HW Rev...1.0/0.8 Mp) mode 64K 64K FW/HW Rev...1.0/0.8 Mp) mode 64K 64K FW/HW Rev...1.0/0.8 Mp) mode 64K 64K FW/HW Rev...1.0/0.8
Sp) scram/hdlc inv N/N N/N Battery.....OK
Sp) scram/hdlc inv N/N N/N Battery.....OK Sp) scram/hdlc inv N/N N/N Battery.....OK Sp) scram/hdlc inv N/N N/N Battery.....OK
Kp) clocking ST ST DTE Intf....V.35/RS-232 Kp) clocking ST ST DTE Intf....V.35/RS-232 Kp) clocking ST ST DTE Intf....V.35/RS-232 Kp) clocking ST ST DTE Intf....V.35/RS-232
Gp) LOS lead NONE NONE Data bus....A Gp) LOS lead NONE NONE Data bus....A Gp) LOS lead NONE NONE Data bus....A Gp) LOS lead NONE NONE Data bus....A
Ep) enable loop YES YES Tp) test and monitor BEC Ep) enable loop YES YES Tp) test and monitor BEC Ep) enable loop YES YES Tp) test and monitor BEC Ep) enable loop YES YES Tp) test and monitor BEC
Np) near loopback OFF OFF Pp) monitor leads and status Np) near loopback OFF OFF Pp) monitor leads and status Np) near loopback OFF OFF Pp) monitor leads and status Np) near loopback OFF OFF Pp) monitor leads and status