Upsite 10164 Adjustable Rack Gap Panel - Manual (Page 2)

Installation Guide
2. Attach the AisleLok ® Adjustable Rack Gap Panel Assembly to the side of
the cabinet (or other steel surface)
a. Remove the AisleLok ® Adjustable Rack Gap Panel Assembly from the
packaging and stand the AisleLok ® Adjustable Rack Gap Panel Assembly
up vertically with the graphics facing you and the case side magnets on the
right and the handle on the left.
b. Position the bottom of the AisleLok ® Adjustable Rack Gap Panel Assembly,
with the magnets facing the cabinet side panel, against the base of the
cabinet side panel (or other steel surface) in the location desired.
c. With the bottom of the case touching the cabinet side panel (or other steel
surface), slowly pivot the top of the case into position. Keep fingers clear of
the contact area as the AisleLok
® Adjustable Rack Gap Panel will ‘snap’ in
place, as the magnets take hold.
Make sure the case is plumb and as close to the front of the gap as possible.
3. Extend the retractable material to close off the gap
a. With the case magnetically fixed to the side of the metal surface, grab the
handle and gently lift up and pull the spring loaded material from the case.
b. Continue pulling the material across the gap opening until the magnets in
the handle side contact the adjacent cabinet (or other steel surface).
c. Adjust the handle side so it is plumb and positioned properly.
Note: To Remove the AisleLok ® Adjustable Rack Gap Panel Assembly simply
reverse Steps 1 – 3
To release the handle side of the material from the magnetic attachment, pull
sufficiently to overcome the magnet hold.
To release the magnetic hold of the case against the side panel, grab the very
top of the case and give a strong tug (only at the top) until you overcome the
magnet hold and are able to free the case from the cabinet.
Mounting on non-magnetic surfaces
An optional mounting kit is available from Upsite Technologies for mounting
the rack gap filler on non-magnetic surfaces. Please contact sales or visit our
website for details. www.upsite.com