Upsite 40001 4 Round Grommet - Manual (Page 2)

Designer & Manufacturer
(888) 982-7800 www.upsite.com
Installation Guide
KoldLok ® Round 4” & 6” Floor Grommets
Tools & Preparation Required for Installation
Tools Required:
• Phillips head screwdriver or drill
• Cutting tool (per floor tile manufacturer recommendations)
• Tape measure
Dimensions & Tile Cutting Requirements Inches (W x D) Millimeters (W x D)
Part No. 40001 - Overall Size (diameter x height) 5.61” x 1.9” 143 mm x 48 mm
Product height above the raised floor .4” 10 mm
Maximum cutout size sealed 4.125” 105 mm
Usable area 9.6 sq inch 244 mm
Hole cut diameter 4” 102 mm
Part No. 40003 - Overall size (diameter x height) 7.56” x 1.9” 192 x 48 mm
Product height above the raised floor .4” 10 mm
Maximum cutout size sealed 6.125” 156 mm
Usable cable area 22.55 sq. inch 573 mm
Hole cut diameter 6” 152 mm
Cutting Raised Floor Tiles:
Each raised floor tile manufacturer provides instructions to properly and safely modify their
products. Installers must be familiar with and observe tile manufacturer’s recommendations with
regard to applicable tools, cutting procedures, the design load capacity of the cut tile, and any
additional under-floor support requirements for cut raised floor tiles.
Product Drawings:
Round 4” Floor Grommet
Part No. 40001
Round 6” Floor Grommet
Part No. 40003
2