Triplett Fox & Hound 3 – PN: 3397 - Manual (Page 5)

5
4: Safety Warnings and Cautions
4.1
Do not connect FOX or HOUND 3 to any source of AC power.
AC voltages above 30 volts can be dangerous, and may re-
sult in user injury. The FOX and HOUND 3 is not intended to
trace live AC power lines. The FOX will be damaged if con-
nected to a live AC power line.
4.2
Use care when using the HOUND 3 to probe any wire or cable.
An unexpected dangerous voltage may be present, which
may result in injury to the user.
4.3
Potentials applied to the HOUND 3’s probe may appear,
greatly reduced, at the earphone jack. This could pose a shock
hazard to the user, if for example, the probe is brought in
contact with a high voltage potential.
4.4
The HOUND 3’s metal probe can accidentally short out a cir-
cuit that is being tested. Use care when testing live circuitry,
or an accidental short may result in equipment damage or
user injury.