Triplett TDR - Manual (Page 9)

Page 8
6. Setting the cable type
Before the TDR can be used to take measurements, it needs to be set for the
cable type to be measured.
If the cable is listed in the library (see Section 16) then setting up is simply
a matter of selecting the appropriate cable type.
7. Selecting a library cable type
1. Switch on the TDR with the ON/Off switch at the side of the unit
2. The display will show the previously selected cable setting with its Vp.
For example
3. Scroll through the library using the and keys to find the required
cable type. The types are displayed in alphabetical order and listed in
Section 16 of this user guide.
When the TDR is switched off it automatically stores the last setting and will
display this setting when powered up.
E/net 9907
Vp=78%