Triplett 1201 - Manual (Page 3)

9. Fuse replacement
9-1 To avoid electrical shock or injury, remove test leads from circuitry
before replacing the fuse.
9-2 Before attempting to remove the rear cover to replace the fuse, be
certain the test leads have been disconnected from the circuit. Power
off the meter and remove the test leads from the banana jacks. To
access the fuse holder, remove the (2) screws in the rear cover and lift
the cover.
9-3 Replace the old fuse only with the same type and rating: 6×30mm
200mA/500V fast fuse.
9-4 Replace the rear cover and reinstall the (2) screws.
10. Maintenance
10-1 Before attempting to remove the battery door or open the case, be
certain that test leads have been disconnected from energized circuitry
to avoid electric shock hazard.
10-2 Replace the test leads if the any wire is exposed, or if they become
damaged.
10-3 Do not use harsh chemicals or solvents to clean the meter.
10-4 Do not use the meter with the rear cover removed. Injury may result.
10-5 If the meter will not be used for more than 1 month, remove the battery
to avoid possible damage from battery leakage.
11. Accessories
1. Test Leads (2) (red, black): electric rating 1000V 10A
2. Clips (2) (red, black)
3. “K” type thermocouple probe (1)
4. Instruction Manual
5. Battery (9V 6F22)
6. Fuse, Fast Acting 200mA / 500V
Warranty
Triplett / Byte Brothers extends the following warranty to the original pur-
chaser of these goods for use. Triplett warrants to the original purchaser for
use that the products sold by it will be free from defects in workmanship and
material for a period of (3) three years from the date of purchase.
This warranty does not apply to any of our products which have been
repaired or altered by unauthorized persons in any way or purchased from
unauthorized distributors so as, in our sole judgment, to injure their stability
or reliability, or which have been subject to misuse, abuse, misapplication,
negligence, accident or which have had the serial numbers altered, defaced,
or removed. Accessories, including batteries and fuses, are not covered by
this warranty.
To register a claim under the provisions of this warranty, please contact the
distributor from which you purchased the product from for warranty consid-
eration.
ALL WARRANTIES IMPLIED BY LAW ARE HEREBY LIMITED TO A
PERIOD OF THREE YEARS FROM DATE OF PURCHASE, AND THE
PROVISIONS OF THE WARRANTY ARE EXPRESSLY IN LIEU OF ANY
OTHER WARRANTIES EXPRESSED OR IMPLIED.
The purchaser agrees to assume all liability for any damages and bodily
injury which may result from the use or misuse of the product by the pur-
chaser, his employees, or others, and the remedies provided for in this war-
ranty are expressly in lieu of any other liability Triplett may have, including
incidental or consequential damages.
Some states (USA ONLY) do not allow the exclusion or limitation of inci-
dental or consequential damages, so the above limitation or exclusion may
not apply to you No representative of Triplett / Byte Brothers or any other
person is authorized to extend the liability of Triplett in connection with the
sale of its products beyond the terms hereof.
Triplett / Byte Brothers reserves the right to discontinue models at any time,
or change specifications, price or design, without notice and without incur-
ring any obligation.
This warranty gives you specific legal rights, and you may have other rights
which vary from state to state.
This warranty gives you specific legal rights, and you may have other rights
which vary from state to state.
Model 1201
Part Number: 1201
Made in China
84-906
10/14