Tri Tool SQM-2AC Squaring Module - Manual (Page 9)

9
Model SQM-2AC Squaring Module
92-0714 : Rev. 970428
WARNING:
OPERATION
IN GENERAL
Read the operating instructions carefully before attempting to operate the Model
SQM-2AC Squaring Module.
Refer to the Operator’s Manual for operating instructions for the Model 576AC
SEVERMASTER
TM .
The use of dull or improperly designed tool bits or tool bits not manufactured
by TRI TOOL Inc. may result in poor performance and may constitute abuse
of this machine and therefore voids the TRI TOOL Inc. factory warranty.
INSTALLATION
The hinge bracket is in the raised position while the other tool module performs the
severing operation.
Loosen the hinge bracket by rotating the adjustment lever.
Swing the hinge bracket down into the vertical position.